pH meter Pro 4-in-1 (Zamnesia)
The pH Meter Pro (Zamnesia) is a 4-in-1 pen for your nutrient tank, covering pH, EC, TDS and temperature in one device. Press MODE to switch readings, with temperature shown alongside each one. Factory-calibrated, with buffer powders included for recalibration.
| Buy 3 units | 5% Discount |
| Buy 5 units | 10% Discount |
| Buy 10 units | 15% Discount |
One meter for your whole feed check
Feeding to a schedule means checking two things every time: can your plants actually absorb what's in the tank, and how strong is that feed. pH answers the first question. EC (electrical conductivity) and TDS (total dissolved solids) answer the second, both are just ways of measuring how much nutrient is dissolved in the water. The pH Meter Pro reads all three, plus temperature, on one display, so you're not juggling a separate pH pen and an EC tester at the tank.
Press MODE, read pH, EC or TDS
A MODE button moves you between pH, EC (shown in µS/cm or mS/cm) and TDS (ppm or ppt). Whichever you're on, the temperature reads alongside it, so you get two numbers at once instead of switching devices to check both. HOLD freezes a reading so you can pull the probe out of the tank and read it properly, and a long press toggles between °C and °F.
Ready out of the box, easy to keep accurate
The meter comes factory-calibrated, and the box includes pH buffer powders (6.86, 4.00 and 9.18) for when it needs recalibrating. EC calibration uses 1413 µS/cm and 12.88 mS/cm solutions. The electrode unscrews and swaps out when it wears down, so a tired probe doesn't mean buying a whole new meter. It's backed by a 3-year warranty on materials and workmanship. In the box: the meter, the three pH buffer powders and a manual. If you only ever need to check pH, the Basic pH Meter covers that on its own.
