pH meter (Zamnesia)
Right pH means your plants actually absorb what you feed them. The Zamnesia pH Meter reads 0.00-14.00 pH at 0.01 resolution on a backlit LCD, so you catch nutrient lockout before it starts. Pocket-sized at 153 x 29 x 16 mm, with simple two-button calibration.
| Buy 3 units | 5% Discount |
| Buy 5 units | 10% Discount |
| Buy 10 units | 15% Discount |
Stop guessing, start reading
Feed your plants correctly and still watch them struggle, and pH is usually the reason. When nutrient solution or irrigation water sits outside the right range, roots can't take up what you've fed them, even at the correct strength. That's nutrient lockout, and it happens quietly. The Zamnesia pH Meter is a digital pen tester built to catch it early. It reads the full 0.00-14.00 pH range at 0.01 resolution, shown clearly on a large backlit LCD, so you know exactly where your solution stands before it becomes a problem.
Calibration without the fuss
A meter is only as good as its calibration, and this one keeps that step simple. Press and hold the CAL button for 5 seconds per buffer solution, and the display shows "End" once that point is set. No screwdriver, no fiddly trimmers. You'll still need buffer solutions on hand to calibrate it properly, same as any pH meter. Day to day, operation is just two buttons, ON/OFF and CAL, with a reading that settles in about 30 seconds. At 153 x 29 x 16 mm and 52 g, it slips into a pocket or a grow kit without adding bulk, and the electrode sits under a protective cap when it's not in use. It runs on two user-replaceable LR44 button cells, with a low-battery warning on screen so it doesn't die on you mid-check. Keep it below the immersion line when testing, it's not built for full submersion. If you're after more from a meter, Zamnesia also carries a Pro version with extra features for growers who want to go further.
